Home / Reviews / Kits

Royal Navy Wooden Torpedo Boat WTB 12, 56 ft – Falconet 1:48

A 56-foot wooden torpedo boat built by J. S. White at Cowes in 1888 – the kind of small, atypical subject that not everyone builds.

Royal Navy Wooden Torpedo Boat WTB 12, 56 ft – Falconet 1:48

The boat

According to Falconet, the 56-foot wooden torpedo boat with hull number WTB 12 was built by J. Samuel White at Cowes in 1888 for the Royal Navy. She represents a series of twelve wooden torpedo boats intended to be carried by the battleships and cruisers of the British fleet; until 1906 they were the fleet’s standard picket boats. The first nine were ordered in 1883, two more in 1887 and the last in 1888. Unlike the Thornycroft and Yarrow boats they had wooden hulls, and they were the precursors of the 56-foot steam pinnaces that replaced the second-class steel boats in a multi-role function.

The kit

In 1:48 the model is 369 mm long, 150 mm high and 62 mm wide; Falconet rates it intermediate to advanced. The box contains four sheets of laser-cut MDF for the building jig, five sheets of laser-cut pear, two sheets of laser-cut planks, three photo-etched brass sheets, brass metalwork, a rudder wheel, resin parts, cast brass parts of excellent quality, very small turned brass parts for the steam engine and a very small chain.

The kit was shipped directly from Russia, so there was a small customs fee. Everything is stored safely and tidily in the box.

The kit box The opened box The contents under foil
The box and its contents.

The wood

The wood package first, starting with the perfectly lasered MDF for the building jig. Then the pear sheets: super-finely lasered, much better than some other modern European manufacturers – and so is the rest. The last sheet carries the pre-spiled planking. It is not pear, but it will be painted anyway.

The wood package MDF for the building jig Laser-cut MDF frames
The wood package and the MDF building jig.
Pear sheet with fine gratings Lasered gratings in pear Pear sheet with deck parts
Super-finely lasered pear.
Another pear sheet The sheet with pre-spiled planks
More pear, and the pre-spiled planking.

Photo-etch

The photo-etched parts are two-layered and very finely detailed. It would have been nice to get them a little cleaner, but acetone will do the job, I guess. There is a lot of metalwork on this boat – it will be fun.

Photo-etch sheets Photo-etch in detail
The photo-etch sheets.
Photo-etch with hull fittings More photo-etch
Two layers, very good detail.

Accessories

Well packed in a separate box there are more goodies to discover: more brass metalwork, the rudder wheel, resin parts, cast brass parts of excellent quality, very small turned brass parts for the steam engine and a very small chain.

The accessories box Bags in the accessories box
The accessories, well packed.
Brass and resin parts More small parts
Brass metalwork and resin parts.
Cast brass part in the hand Cast brass part in detail Cast brass fittings
Cast brass parts of excellent quality.
Turned brass parts for the steam engine Turned parts and chain next to a USB stick
Turned brass parts for the steam engine, with a USB stick for scale.
The rudder wheel mini-kit Rudder wheel parts
The rudder wheel mini-kit.

The instruction manual

The image-based manual is very good in my opinion. Falconet also publishes the manual and the specification online.

The instruction manual Drawings in the manual Steps for the steam engine
The image-based instruction manual.

Conclusion

Personally, I am more and more attracted to smaller, atypical kits that not everyone builds and that do not take years. Falconet, like other Russian manufacturers, offers beautiful small models that produce great results with high-quality materials at a reasonable price. Unfortunately these kits have become difficult to buy, but on the Ships of Scale forum Vladimir (Walterone) is very happy to help, make contact and handle the process – which has always worked without a hitch. Thanks, Vladimir!

On the plus side: pear, an unusual vessel, lots of high-quality brass parts, 1:48, a high-quality photo-etch sheet and a very good image-based manual. On the minus side: the double-barrelled Nordenfelt gun, the torpedoes and their fittings are missing in this basic version – I hope to get them later for another review. Basically a 100 % buy recommendation. My sincere thanks go to Falconet for sending this kit for review.

Pro

  • Pear wood
  • Unusual vessel
  • Lots of high-quality brass parts
  • Scale 1:48
  • High-quality photo-etch
  • Very good picture-based manual

Contra

  • Twin-barrelled Nordenfelt gun, torpedoes and arrays not included in the basic version

Full review with all photos in the forum ↗