Home / Reviews / Kits

Santa Maria – Mini Mamoli 1:106 (Dusek Ship Kits)

Columbus's flagship, the nao Santa Maria, as a small Mini Mamoli kit with a prefabricated hull and a pear deck.

Santa Maria – Mini Mamoli 1:106 (Dusek Ship Kits)

The subject

What were the ships of the great discovery of the New World like? Tradition always speaks of three caravels – swift ships with a light hull, several masts and an assortment of sails. According to the kit description, Columbus’s fleet in fact consisted of two caravels, Niña and Pinta, and a nao, the Santa María: a three-masted ship with two square sails and a lateen sail and a forecastle, which places her closer to the carracks. Her strong construction, the nautical knowledge of the time and the instinct of a great sailor made the enterprise of 1492 possible.

The kit

In 2016 Daniel Dusek bought the rights to all Mamoli and MiniMamoli kits, and since then they have been re-released in batches. The MiniMamoli Santa Maria (MM02) is a small one: in 1:106 the model is 310 mm long and 255 mm high.

The box contains five sheets of plans and instructions in English, French, Dutch and German, a prefabricated wooden hull, four sheets of laser-cut wood – one of them pear – dowels for masts and yards, and fine-meshed sail cloth. Everything is packed so that nothing can move around in the box.

The opened kit box
The opened box.

The hull

The prefabricated wooden hull makes it easy even for beginners to get the shape of the hull right on a small model.

The prefabricated wooden hull The hull from another angle
The prefabricated hull.

Small parts

All the small parts are well stowed away, and the castings make a very good impression.

The small parts in their tray Rigging thread and small parts The castings
Small parts, rigging thread and castings.

Laser-cut wood

The deck of the Santa Maria comes with all planks pre-lasered in beautiful pear – in a beginner’s kit. Wonderful! The other sheets are laser-cut in beech, and there is nothing wrong with that either: very little laser char, everything clean and crisp.

The pear deck with pre-lasered planks Laser-cut beech sheet
The pear deck and a beech sheet.
Laser-cut sheet with gratings Another laser-cut sheet
Clean and crisp, very little char.

Dowels and sail cloth

The dowels for masts and spars are good, and for everyone who wants to make sails, a very nice fine-meshed fabric is included.

Dowels for masts and spars The dowels in close-up The sail cloth
Dowels, and the fine-meshed sail cloth.

Instructions

The multilingual manual should make it easy for beginners to build a lovely little model with a lot of fun.

The multilingual manual A plan sheet
Manual and plans.

Conclusion

With high-quality components – where else do you find pear in a beginner’s kit? – a revised manual and a really attractive price, Daniel Dusek is leading the MiniMamoli series into a successful future. This little kit of a classic historic ship is really great: for beginners, but certainly also for advanced builders looking for a small, enjoyable project in between. Dusek Ship Kits listed it at € 70.50 at the time, which I think is really good value for a beginner’s kit. My sincere thanks go to Daniel Dusek for sending this kit for review.

Pro

  • Prefabricated wooden hull
  • Deck planks lasered in pear
  • Clean laser cutting
  • Good castings
  • Multilingual manual

Contra

None

Full review with all photos in the forum ↗