Home / Reviews / Kits

Russian Four-Oared Whaleboat, 19 ft – Falconet 1:48

The whaleboat of the schooner Opyt, the yacht of the Kronstadt port commander – a small boat that hung from davits on the ship's side, as a fine pear kit from Falconet.

Russian Four-Oared Whaleboat, 19 ft – Falconet 1:48

The subject

According to Falconet, this 19-foot four-oared whaleboat belonged to the schooner Opyt, the yacht of the commander of the port of Kronstadt, and was designed to be carried in davits on the ship’s side.

The kit

Kit FN020448V builds the whaleboat in 1:48; the model is just 122 mm long, and Falconet rates it intermediate to advanced. The box contains four pear veneers, a further wood sheet, the jig, a small photo-etch sheet, three brass wires and an instruction manual in Russian. All parts are stored safely and tidily.

The kit package The package from the front The contents in the bag
The kit and its contents.

The wood

The pear veneers are lasered cleanly, and there is one more sheet for the jig.

Pear veneer with the jig on top Pear veneers with keel parts
The pear veneers.
Laser-cut pear veneer Pear veneer with the planks Another pear sheet
More pear.

The jig

The jig consists of a laser-cut sheet and a printed mould in two halves, on which the boat takes shape – an interesting mould, as a forum member noted.

Laser-cut jig sheet The two halves of the printed mould
The jig and the mould.

Photo-etch

The photo-etched parts are two-layered and very finely detailed; brass wire completes the set.

Photo-etch sheet and brass wire
Two-layer photo-etch and brass wire.

The manual

The manual is in Russian, but it is picture-based and very good. I have also put it in the gallery as a PDF.

The instruction manual Building steps The finished boat drawing
The picture-based manual.

Conclusion

I like these small kits. They are not easy to build and need a lot of patience, but the result is always pleasing. I wish boats of this quality were on the market in 1:64 for the Royal Navy and others. Falconet, like other Russian manufacturers, offers beautiful small models that produce great results with high-quality materials at a reasonable price. Unfortunately these kits have become difficult to buy, but it is worth a try.

Pear, a small project, 1:48, a high-quality photo-etch sheet and a very good picture-based manual – and nothing on the minus side. As usual a 100 % buy recommendation. My sincere thanks go to Falconet for sending this kit for review.

Pro

  • Pear wood
  • Small project
  • Scale 1:48
  • High-quality photo-etch
  • Very good picture-based manual

Contra

None

Full review with all photos in the forum ↗