Home / Reviews / Kits

Royal Navy Pinnace, late 18th century – Modelship Dockyard 1:48

The 28-foot pinnace was the workhorse among the boats of a late 18th-century Royal Navy warship – ferrying officers, scouting shallow water and hauling provisions. Modelship Dockyard offers her as a small pear kit in 1:48.

Royal Navy Pinnace, late 18th century – Modelship Dockyard 1:48

The subject

Modelship Dockyard introduces the kit like this: for ship modellers, the authentic essence of the age of sail often lies in the smallest details – the boats that crowded the decks of historic warships. In the late 18th century the 28-foot Royal Navy pinnace was a true workhorse of the fleet, combining elegant lines with rugged utility: she carried officers, scouted shallow waters and hauled provisions. Replicating this craft in miniature is a unique and rewarding challenge.

The kit

In 1:48 the model measures 183 × 45 × 37 mm; the manufacturer rates it intermediate to advanced. The box contains three pear veneer sheets for the planks and other parts, two pear sheets for keel and frames, three plywood sheets for the jig, a small photo-etch sheet, brass wire and an instruction manual in English. All parts are stored safely and tidily.

The kit box The opened box with the instructions
The box and its contents.

Pear for keel and frames

The two pear sheets carry the keel and the frames, cleanly lasered.

Pear sheets for keel and frames The frames in close-up
Keel and frames in pear.

Pear veneer for the planks

The three veneer sheets carry the planks and the other thin parts.

Pear veneer with the planks Another pear veneer sheet
The pear veneers.

Jig, photo-etch and brass wire

Three plywood sheets form the building jig. A small photo-etch sheet and brass wire complete the kit.

Plywood sheets for the jig Photo-etch sheet and brass wire
The jig sheets, photo-etch and brass wire.

The instructions

The instructions are in English and well presented; they should give a good foundation for the build.

The instruction manual Pages of the manual
The English instructions.

Conclusion

The 28-foot Royal Navy pinnace from Modelship Dockyard is a nice little project for anyone looking to build a smaller ship’s boat in 1:48. The main wooden parts are pear, and the combination of pear, photo-etch and brass wire is a good basis for a detailed model. The construction appears fairly straightforward, although the kit is certainly better suited to modellers with some experience.

There are, however, a few shortcomings. The kit includes no oars, and as far as I can tell the knees for the thwarts are missing, as are the lodging knees at the aftermost thwart in the stern. Some accessories – a water cask, bailer, buckets, an anchor or boat hooks – would have been welcome and would give the finished boat a more authentic appearance.

Overall, an attractive and reasonably priced small project at $ 59. With some scratch-built details and accessories, it can become a very convincing representation of a late-18th-century Royal Navy pinnace.

Pro

  • Pear wood
  • Small project
  • Scale 1:48
  • Photo-etch sheet
  • Instructions look good

Contra

  • No oars
  • Knees for the rowing benches missing
  • No accessories such as water cask, bailer, buckets, anchor or boat hooks

Full review with all photos in the forum ↗Available from Dry-Dock Models & Parts ↗