The ship
HMS Enterprise (historically spelled Enterprize) was a 28-gun sixth-rate frigate of the Royal Navy and the name ship of a class of twenty-seven. She was built at Deptford Dockyard, launched in August 1774 and commissioned in April 1775 under Captain Sir Thomas Rich. While she was building, Joseph Marshall painted her in a pair of oil paintings that look like a ship model but were drawn from her plans – part of a series commissioned by George III and completed in 1777; the pair is now split between the National Maritime Museum and the Science Museum.
She served throughout the American War of Independence as a cruiser and convoy escort. On 7 June 1780, at anchor in the Bay of Gibraltar under Captain Patrick Leslie, she spotted six vessels drifting towards the harbour; their crews set them on fire and escaped in boats. Leslie fired a three-gun warning, cut his cables and opened fire on the fireships, while British seamen boarded the burning hulks from small boats to tow them clear. In 1782 she sailed for the Leeward Islands, and in October of that year, under Captain William Carnegie, she captured the 22-gun American privateer Mohawk.
Enterprise was paid off in May 1784. From 1790 she served as a receiving ship in home waters, and in 1791, during the Spanish Armament, she was hulked at the Tower of London as a receiving ship for pressed men. She was taken to Deptford in 1806 and broken up in 1807 (source: Wikipedia, HMS Enterprise (1774)).
The kit
Unicorn Models offers this midship cross-section in pear and in boxwood; I prefer pear, so that is what I show here. In 1:160 the model is 119 mm long, 69 mm wide and 75 mm high; the manufacturer rates it intermediate to advanced. The box contains laser-cut plywood for the building jigs, pear sheets for the frames, the decks and the boats, a black wood sheet for the wales, walnut for the stand, one dowel, brass nails, guns and photo-etched parts. Everything is stored safely and tidily. I have since started building it – see my build log of the Enterprise cross-section.

Building jigs
Let’s start with the perfectly lasered plywood for the numerous building jigs – including jigs for the small boats, three of them!


Pear for the frames
The pear sheets for the frames come with the brass parts.


Decks, knees and boats
Thinner pear sheets carry the decks, knees and much more. Then the sheets for the three boats – very tiny – some more pear together with the stand in walnut, and last but not least a sheet of black wood for the wales.



The instructions
The English instructions are clear and well translated. Unicorn Models also provides the full manual online.


Sandwiched decks
The decks are made of two layers, like a sandwich – very difficult to align and glue exactly. Here I tried to “fold” one – see the yellow masking tape.

Conclusion
I had previously built the HMS Druid 1776 stern cross-section from Unicorn Models in 1:128 and really enjoyed the challenge of fitting so much detail into such a small model. This Enterprise midship section takes that experience to another level: the detail that can be achieved at 1:160 is simply incredible. The kit contains a remarkable number of precisely laser-cut parts, and the numerous jigs are not only very well made but extremely helpful during construction. Three small boats are another nice touch. The materials are excellent, with a generous amount of pear, the photo-etch is of very high quality, and the English instructions are clear.
One important point is worth mentioning. The model mixes the Enterprise in her original role as a fighting ship with her later period as a receiving ship. That is historically not entirely consistent, as her plans and configuration changed considerably in her receiving-ship days: the 1787 drawing, for example, shows her holding pressed men before they were sent to the fighting ships, and the plans from her time as an active warship are quite different. The sandwiched decks may also be a matter of taste, although I understand the design decision at this very small scale.
Overall, an outstanding little kit. Considering the materials, the amount of pear, the excellent jigs, the photo-etch and the sheer amount of detail possible in such a small model, the price of $ 139 at the time is remarkably reasonable. For me, basically a 100 % buy recommendation. The stern cross-section from Unicorn Models is already waiting on my workbench – and after this kit I am definitely looking forward to it.
Pro
- Excellent pear, and lots of it
- Numerous well-designed building jigs
- High-quality photo-etch
- Clear, well-translated English instructions
- Three boats included
- Exceptional detail for 1:160
Contra
- Mixes features of her career as a fighting ship and as a receiving ship
- Sandwiched decks may not appeal to everyone
Full review with all photos in the forum ↗Available from Dry-Dock Models & Parts ↗
