The subject
Unicorn Model describes the French longboat as one of the most versatile and indispensable craft carried aboard a ship. She transported supplies, moved anchors, fetched water on campaign, landed troops in coastal operations, carried officers and distinguished passengers, towed vessels in calm weather and did countless other jobs. Because her design changed very little, the longboat kept essentially the same structure from around 1680 to 1780.
The kit shows a 36-foot longboat. That length was typical of the master longboats of first-rate warships in the late 17th century, and it remained common aboard 74-gun ships of the 18th century, even as those ships gradually grew larger.
The kit
In 1:24 the model is 590 mm long, 128 mm wide and 388 mm high; Unicorn Model rates it intermediate to advanced. The basic kit contains pear sheets and pear dowels, the jig, small photo-etch sheets, brass wire for nailing, small brass parts, brass swivel guns, sails, rope, blocks, two 1:1 plans and an instruction manual in English. The gun addition brings more pear sheets, a turned brass gun, blocks, brass wire, rope, a small photo-etch sheet and further brass parts. Everything arrived safely packed.

The pear sheets
The kit contains a generous supply of pear, and my overall impression of the material is very positive. Before discussing the wood itself, however, there are two points I would like to mention.
The first, and by far the most significant, concerns the yellow-orange adhesive tape used to bundle the smaller packages. Unfortunately the adhesive seems to penetrate deeply into the wood, particularly on the thinner sheets used for planking. In some cases the residue is clearly visible on the reverse side of the sheet and has gone so deep that it cannot be removed completely. On thicker stock this may be less of a problem, but on thin planking, where sanding is not an option, it is a real issue: the affected areas are unlikely to take oil, stain or other finishes evenly. Given the otherwise excellent quality of the kit this is disappointing – but it should be easy for Unicorn Model to solve with a different packaging method.

As for the wood itself, the selection and quality of the pear are very good overall. The sheets show attractive colour and grain and are well suited for a high-end project like this. Only sheets 9 and 21 stand out – I would personally have chosen different pieces – but they remain perfectly usable, a minor criticism rather than a serious concern. The laser cutting is equally impressive: clean, precise and sharply defined, with minimal scorching and excellent edges. The pear and the laser work are among the strongest points of this kit.



Planks and dowels
The planks come lasered in pear as well, and even the round stock appears to be pear – a detail rarely found.


Jig and stand
The kit also contains the parts for the building jig and a stand.

Photo-etch, sails and rope
Photo-etch, brass parts, brass wire for the nailing, and pre-made sails. The rope is the one area where the kit falls short of the otherwise excellent standard: entirely usable, but its look and quality do not match the rest. For my own build I will use rope of my own making.


Plans and manual
Unlike many kits from Chinese manufacturers, whose instructions can be limited or poorly translated, this kit includes two complete full-size plans with everything needed for construction, annotated in English. That makes the kit accessible to a much wider audience and removes much of the guesswork that often comes with complex historical models. An image-based manual and a parts list complete the documentation.


The gun addition
The optional gun addition brings a turned brass gun, extra pear sheets and the parts needed to arm the longboat.

Conclusion
After a thorough look at the kit, I can say that it is exceptional in several respects. The design is clearly based on careful research and primary sources, giving it a historical authenticity that serious builders will appreciate, from the concept down to the smallest details. The pear parts are beautifully made, crisp and precise, with minimal clean-up, and the two complete 1:1 plans with English notes are a major strength.
No kit is without flaws: the adhesive residue from the packing tape, the rope, and the choice of wood for two sheets. Taken as a whole, these criticisms do little to diminish the overall impression. The combination of historical accuracy, outstanding materials, excellent manufacturing and comprehensive plans makes this kit exceptional value for money. Whether you are an experienced modeller looking for a rewarding project or a builder with a particular interest in historically accurate naval craft, it deserves serious consideration. It earns my strongest recommendation and, in my opinion, ranks among the finest kits currently available in its category.
Pro
- Lots of pear
- Scale 1:24
- Jig
- Photo-etch parts
- High-class blocks
- Good picture-based manual
- Two 1:1 plans
Contra
- Adhesive residue from the packing tape
- Low-quality rope
Full review with all photos in the forum ↗Available from Dry-Dock Models & Parts ↗
