Home / Reviews / Kits

Catalina – Mini Mamoli 1:64 (Dusek Ship Kits)

A Lemster barge – the Frisian fishing boat that won the hearts of yachtsmen – as a small Mini Mamoli kit with a pear deck.

Catalina – Mini Mamoli 1:64 (Dusek Ship Kits)

The subject

The kit description gives a good history of the type. The first Lemster barges (Lemsteraken) were built in 1876 at the yard of the Gebroeders De Boer in Lemmer, Friesland. The wooden barges were at first 36 feet long, gradually growing to 38, 40 and 42 feet; from 1902 the yard built them with iron hulls, and the length rose to 45, 47 and 50 feet.

The Lemster barge was originally a fishing vessel for the northern part of the then still open Zuiderzee, where very foul seas could build up when wind and tide ran against each other. She was therefore designed to be very seaworthy, with very good sailing qualities – and these qualities and her flowing lines made her one of the best and most beautiful Dutch round-bilged sailing yachts. Although she came from Friesland in the north, she also found a place in the fishing fleet of Zeeland in the south-west, where she was used for mussel fishing.

Yachtsmen took to her as well: in 1907 the De Boer yard built the first iron-hulled sailing yacht of the type, the Antje. The best-known Lemster barge is undoubtedly De Groene Draeck (The Green Dragon), designed by A. de Boer, built by G. de Vries Lentsch Jr. in Amsterdam and presented to Crown Princess Beatrix on 15 June 1957.

The kit

In 2016 Daniel Dusek bought the rights to all Mamoli and MiniMamoli kits, and since then they have been re-released in batches. The MiniMamoli Catalina (MM61) is built in 1:64; the model is 310 mm long and 265 mm high.

The box contains five sheets of plans and instructions in English, French, Dutch and German, a prefabricated wooden hull, six sheets of laser-cut wood – two of them pear – dowels for masts and yards, photo-etched brass parts and fine-meshed sail cloth. Everything is packed so that nothing can move around in the box.

The opened kit box
The opened box.

Hull and small parts

The prefabricated wooden hull makes it easy even for beginners to get the typical Dutch hull shape right on a small model. All the small parts are well stowed away, and the castings make a very good impression.

The prefabricated wooden hull The small parts in their tray Small parts, flag and dowels
The prefabricated hull and the small parts.

Laser-cut wood

The deck of the Catalina comes with all planks pre-lasered in beautiful pear – in a beginner’s kit. Wonderful! More parts are lasered in pear as well. The other sheets are beech, and there is nothing wrong with that either: very little laser char, everything clean and crisp. Some parts are plywood.

The pear deck with pre-lasered planks More parts lasered in pear
The pear deck, and more pear parts.
Laser-cut beech sheet Beech sheet with the name boards Plywood parts
Beech and plywood – clean, crisp, hardly any char.

Photo-etch and sail cloth

Photo-etched parts for the portholes and the rudder fittings round everything off. And for everyone who wants to make sails, a very nice fine-meshed fabric is included.

The photo-etch sheet All the sheets laid out The sail cloth
Photo-etch, all sheets at a glance, and the sail cloth.

Instructions

The multilingual manual should make it easy for beginners to build a lovely little model with a lot of fun.

The multilingual manual The rigging plan Plan sheets
Manual and plans.

Conclusion

With high-quality components – where else do you find pear in a beginner’s kit? – a revised manual and a really attractive price, Daniel Dusek is leading the MiniMamoli series into a successful future. This little kit is really great: for beginners, but certainly also for advanced builders looking for a small, enjoyable project in between. Dusek Ship Kits listed it at € 95 at the time, which I think is really good value for a beginner’s kit. My sincere thanks go to Daniel Dusek for sending this kit for review.

Pro

  • Prefabricated wooden hull
  • Deck and further parts lasered in pear
  • Clean laser cutting
  • Photo-etch for portholes and rudder fittings
  • Multilingual manual

Contra

None

Full review with all photos in the forum ↗