Home / Reviews / Kits

Armed Longboat, 18th Century – Model Shipways 1:24

A plank-on-frame armed captain's longboat of 1750–1760 in 1:24 – a wonderful introduction to historical ship modelling.

Armed Longboat, 18th Century – Model Shipways 1:24

The kit

Model Shipways describes the kit (MS1460) as suitable for beginners and experts alike: a true plank-on-frame armed captain’s longboat of 1750–1760 in 1:24, about 24 inches from the tip of the bowsprit to the end of the boom – 660 mm long and 432 mm high according to the technical data.

Every wooden detail of the original is captured in nine sheets of laser-cut basswood – no plywood – and more than 60 basswood strips and dowels. Thirty-six cast Britannia-metal parts (lead-free pewter) reproduce the ironwork as well as the gun and the swivel guns. Split rings, rods, eyebolts, nails, parrels and belaying pins are machined and polished brass. Thirty-four yards of rigging line in five diameters and twenty-two walnut blocks and deadeyes cover the rigging. The decorations along the bulwarks and the transom are neither decals nor paint, but photo-etched brass.

The box also holds three sheets of full-size plans (34 × 44 inches) and a 48-page instruction booklet with more than 130 colour photos. Everything is stored safely and tidily, so nothing can move around.

The opened kit box Wood and parts in the box The parts unpacked
The box and its contents.

Castings

All small parts are well stowed away, and the castings make a very good impression.

Cast Britannia-metal fittings Cast swivel guns and fittings More cast parts
The Britannia-metal castings.

Laser-cut wood

The basswood sheets are cleanly lasered; even on the back you see hardly any laser char.

Laser-cut basswood sheet More laser-cut sheets
Laser-cut basswood – no plywood.
The back of a laser-cut sheet Laser-cut planks Laser-cut gratings
The back of the sheets, with very little char.

Strip wood, photo-etch and brass

The basswood strips and dowels, the photo-etched decorations and the brass parts. All the small parts are packed separately.

Basswood strips and dowels The photo-etch sheet Brass rods
Strip wood, photo-etch and brass.
Small parts packed separately The rigging line
Small parts, and the rope – unusually good for a kit like this.

Plans and instructions

There are three full-size plans showing every detail, and the 48-page instruction booklet with more than 130 colour photos should make it easy for everyone to build a fine model straight from the box. Model Expo also publishes the instructions and the parts list online.

Full-size plan sheet Plan of the frames The rigging plan
The full-size plans.
The instruction booklet Photo instructions More pages of the booklet
The booklet with more than 130 colour photos.

Conclusion

Good materials, detailed instructions and a really attractive price make this model a wonderful introduction to the world of historic ship model building. This little kit is really great: for beginners, but certainly also for advanced builders looking for a small, enjoyable project in between – and it offers plenty of room for additions, such as sails. Model Expo listed it on sale at $ 99.99 at the time (regular price $ 169.99), which I think is really good value. My sincere thanks go to Model Shipways for sending this kit for review.

Pro

  • True plank-on-frame construction
  • Clean laser cutting
  • 36 cast Britannia metal parts
  • Photo-etched decorations
  • Good rope for a kit
  • Three full-size plans and a 48-page photo manual

Contra

None

Full review with all photos in the forum ↗